News Ticker

Get Shorty

A one-of-a-kind 1964½ Mustang prototype fetched $511,500 when auctioned by last year at Fort Lauderdale in Florida by Auctions America.

1964½ Ford Mustang III “Shorty” Factory Prototype photo credit Drew Shipley © 2014 Auctions Americaa (1)

In the early 1960s, as Ford Motor Company product planners, designers and engineers were brainstorming ideas for a compact sporty car, there were numerous proposals for two-seaters. Most of those concepts never got any further than sketches, but at least one running prototype of a two-seat Mustang was built and survives today, thanks to the devotion of Bill Snyder of Hudson, Ohio (USA).

The ‘shorty’ Mustang, as it is often called, was designed by Vince Gardner and built in 1964 by long-time Ford supplier, Dearborn Steel Tubing, for a traveling custom car show. Now known as DST Industries, the company still builds and prepares many Ford prototype, concept and show vehicles.

“I saw the shorty Mustang during one of the stops of that traveling car show and decided I had to have one,” said Snyder. “I told a Ford rep I wanted to buy a two-seat Mustang to go along with my then 10-year-old Corvette, but he said it was a one-off that they were never going to build.”

The owner of Ohio-based screen printing company Nordec, Snyder has always been a sports car fan and he kept an eye out in case Ford ever did produce a similar car. It turns out patience truly is a virtue, and several years later Snyder ended up owning exactly the car he saw on that show stand.

The one-of-a-kind 1964 two-seat Ford Mustang prototype owned by Bill Snyder

After choosing a Gale Halderman-penned two-door hardtop as the basis for the production Mustang in the fall of 1962, the Ford design team continued to look at possible alternatives for expanding the line-up. A convertible joined the hardtop at Mustang’s launch in April 1964, with a fastback coming a few months later. Body styles that were considered and rejected, including a four-door sedan and even a two-door station wagon.

The one-of-a-kind 1964 two-seat Ford Mustang prototype owned by Bill Snyder

Early on in the program, two-seaters were frequently pitched as potential replacements for the late, lamented first-generation Thunderbird, which by that point had grown into a luxury four-seat coupe. However, two-seaters then – and now – are niche products and Ford wanted its new car to have a broader appeal, including young families, so the decision was made that the car would have four seats.

Despite that, when an opportunity arose to build a custom Mustang for an upcoming traveling car show, DST brought in freelance designer Gardner to take another shot at a two-seat Mustang. It’s not known if Gardner ever saw or had access to rejected Ford design studio sketches, but the concept crafted by the DST team bears a strong resemblance to at least one sketch from February 1963.

The one-of-a-kind 1964 two-seat Ford Mustang prototype owned by Bill Snyder

The resulting car is a Mustang fastback with 16 inches removed between the rear edge of the door and the rear axle. Working with one of the preproduction 1965 Mustangs that otherwise would have been sent to the crusher, the DST fabricators created unique rear bodywork from fiberglass and new outer door skins that incorporate the classic Mustang side scoop.

When the tour where Snyder had seen the shorty ended, the car, which was rejected for production, was set to meet the same fate as most such cars – the crusher. Not wanting to see this unique Mustang destroyed, Gardner stashed it away in a nearby warehouse.

The one-of-a-kind 1964 two-seat Ford Mustang prototype owned by Bill Snyder

Several months later, after Ford reported it stolen and received an insurance payout, the warehouse owner discovered the car. Since Gardner had apparently not paid any rent, the insurance company that paid out the claim took possession of the car and later sold it to one of its executives.

Four years after he first saw the shorty Mustang at the car show, Snyder spotted it once again, this time listed in the for sale section of Hemming’s Motor News.

The one-of-a-kind 1964 two-seat Ford Mustang prototype owned by Bill Snyder

“I contacted the seller and immediately sent a driver from my printing business to Connecticut to pick up the car,” said Snyder. “I’ve owned this one-of-a-kind Mustang for the last 46 years.”

Over time, the original auto show lacquer finish cracked and the car was sprayed with body primer as Snyder accumulated about 15,000 miles on the car. Before it went on the show circuit in 1964, Ford engineers installed a special engine. The original 260 cubic-inch V8 that was available in Mustang was bored out to 302 cubic-inches and a trio of two-barrel carburettors were installed, making this effectively a prototype for one of the most beloved engine configurations in Mustang history.

The one-of-a-kind 1964 two-seat Ford Mustang prototype owned by Bill Snyder

When Snyder decided to restore the car several years ago, his wife found some of the original colour under the bonnet and worked with a paint supplier to match it exactly. Since it was a concept car, the original builders had used plexiglass for the quarter windows and backlight rather than cutting custom glass. Despite being heavily fogged after nearly 50 years, the restorers were able to buff the windows back to their original clarity.

Looking as good as or better than it did in 1964, the one-of-a-kind, two-seat shorty Mustang made its debut at the 2013 Amelia Island Concours d’Elegance in Florida. In 2014, Snyder took it to a variety of events celebrating 50 years of Mustang.